Shure Wireless Dig Lapel Systm GLXD1+ WL185 Mic

The new GLX-D+ Dual Band Wireless Digital Lapel System. Ready-To-Go. Every time. Automatically. 

Featuring the premium wearable WL185 lavalier microphone for spoken word applications and the GLXD4R+ half-rack receiver. The new GLXD4+ Dual Band Rack Receiver delivers exceptional digital audio clarity. The perfect combination of the automatic frequency management with the new Dual Band Technology provides reliable and consistent performance, with advanced RF performance for up to 16 simultaneous channels, while Shure proprietary Lithium-Ion rechargeable batteries provide up to 12 hours of use.

Go wireless without complication!

The WL185 Lavalier Microphone:

• Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
• Interchangeable cartridges that provide an optimal choice for each application
• Rotatable tie-clip that pivots in 90 degree increments for placement flexibility
• Supplied snap-fit foam windscreen that controls breath noise and stays on securely
• Supplied dual tie clip holds two microphones for dual miking applications

What is the WL185 best suited to?
The WL185 cardioid miniature lavalier condenser microphone is designed for use in speech applications such as broadcast presenting, speeches, lectures and for use in houses of worship.

What is an interchangeable cartridge?
All the microflex series of microphones use interchangeable cartridges (sold seperately) which means you can swap between cardioid, supercardioid and omnidirectional condenser cartridges simply by screwing them on to the top of the lavalier mic.

GLXD4+ Dual Band Rack Receiver Specifications 

TUNING BANDWIDTH

• Z2: 2400 - 2483.5 MHz
• Z3: 2400 - 2483.5 MHz and 5725 - 5850 MHz
• Z4: 2400 - 2483.5 MHz and 5725 - 5875 MHz
• Z5: 2400 - 2483.5 MHz and 5725 - 5825 MHzDependent on frequency band

TRANSMIT MODE

• Shure proprietary digital

RF OUTPUT POWER

• 10 mW E.I.R.P. maximum

AMBIENT TEMPERATURE RANGE

• Charging: 0°C to 40°C
• Operating: 0°C to 45°C

POLARITY

• Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low­impedance output) and the tip of the high impedance 1/4-inch output.

AUDIO FREQUENCY RESPONSE

• 20 Hz – 20 kHz

DYNAMIC RANGE

• 120 dB, A-weighted

RF SENSITIVITY

• -88 dBm, typical

TOTAL HARMONIC DISTORTION

• 0.07%, typical

BATTERY LIFE

• Up to 11.5 hours

CHANNEL COUNT

• Without Frequency Manager: Up to 4 typical, 8 optimal, 2.4 GHz only: Up to 4 typical, 5 optimal
• With Frequency Manager    Up to 11 typical, 16 optimal, 2.4 GHz only: Up to 9 typical, 11 optimal

GLXD4R+
POWER REQUIREMENTS

• 14.5 V – 17 V, 600 mA (efficiency level VI power supply)

ANTENNA TYPE

• Dual-band ½ Wave Sleeve Dipole

DIMENSIONS

• Without antenna: 196.8H x 162.97W x 41.8D (mm)
• Weight: 866g

HOUSING

• Steel

SPURIOUS REJECTION

• > 35 dB, typical

GAIN ADJUSTMENT RANGE

• -18 to 42 dB, 1 dB increments

PHANTOM POWER PROTECTION

• Yes

AUDIO OUTPUT:

Configuration

• XLR Output: Balanced
• 6.35 mm (1/4") output: Impedance balanced

Impedance

• XLR Output: 100 Ω
• 6.35 mm (1/4") output: 100 Ω (50 Ω, Unbalanced)

Full Scale Output

• 6.35 mm (1/4"): +12 dBV
• XLR: LINE setting = +18 dBV, MIC setting = -12 dBV

Mic/Line Switch

• 30 dB pad

Pin Assignments

• XLR Output: 1=ground, 2=hot, 3=cold
• 6.35 mm (1/4") connector: Tip=audio, Ring=no audio, Sleeve=ground

RECEIVER ANTENNA INPUT:

Impedance

50 Ω

Maximum Input Level

-20 dBm

GLXD1+
POWER REQUIREMENTS

• Shure Rechargeable Li-Ion Battery: SB904
• USB Power Supply (US/Canada): SBC10-USB15WSUSTWJ

ANTENNA TYPE

• Dual-band Internal Monopole

DIMENSIONS

• 115H x 66.94W x 28.51D (mm)

WEIGHT

• Without battery: 153.1g

HOUSING

• Aluminum alloy, ABS plastic

INPUT IMPEDANCE

900 kΩ

TX INPUT:

Connector

• 4-pin male mini connector (TA4M)

Maximum Input Level

• +8.4 dBV (7.5 Vp-p)

Configuration

• Unbalanced

Pin Assignments

• 1: Ground (cable shield)
• 2: + 5 V bias
• 3: Audio
• 4: Tied through active load to ground (on instrument adapter cable, pin 4 floats)

GLXD2+
POWER REQUIREMENTS

• Shure Rechargeable Li-Ion Battery: SB904

DIMENSIONS

• 246 mm

WEIGHT

• SM58: 275g (without battery)
• BETA 58: 225g (without battery)
• BETA 87A: 265g (without battery)

HOUSING

• Aluminum alloy, ABS plastic

MAXIMUM INPUT LEVEL

• SM58: 146 dB SPL
• BETA 58: 147 dB SPL
• BETA 87A: 147 dB SPL

SB904
BATTERY TYPE

• Rechargeable Li-Ion

NOMINAL CAPACITY

• 2420 mAh (8.71 Wh)

NOMINAL VOLTAGE

• 3.6 V

DIMENSIONS

• 72.8H x 20.96W x 20.80D (mm)

WEIGHT

• 53.7g

HOUSING

• PC/ABS

AMBIENT TEMPERATURE RANGE 

• Charging: 0°C to 40°C
• Operating: -18 °C to 45 °C

SBC10-904
DC Input Voltage

• 5 V

AMBIENT TEMPERATURE RANGE

• Operating: 0°C (32°F) to 40°C (104°F)

SBC10-USB15W Power Supply
INPUT VOLTAGE RANGE

• 100 to 240 V AC

MAXIMUM INPUT POWER

• 600 mA @ 100 V AC (full load)

OUTPUT VOLTAGE

• 5 v DC @ 3 A

MAXIMUM OUTPUT POWER

• 15 W

SBC10-USB Power Supply
INPUT VOLTAGE RANGE

• 100 to 240 V AC

MAXIMUM INPUT POWER

• 200 mA @ 100 V AC (full load)

OUTPUT VOLTAGE

• 5 v DC @ 1 A

MAXIMUM OUTPUT POWER

• 5 W

• 1x GLXD4+ Dual Band Rack Receiver
• 1x WL185 Lavalier Microphone
• 1x PS43 Power Supply
• 1x SB904 Lithium-Ion Rechargeable Battery
• 1x Zippered Vinyl Bag
• 1x Rack-mount Hardware